Recycled Wine Cork Earring Card Hole Punch

Holiday time is so busy! I make tons of earrings as gifts and to sell at holiday craft shows. And all those earrings must be professionally presented on earring cards. 

I make my own cards rather than buying commercial ones, so I must punch holes in them myself too. Here's my easy and recycled material two-holes-at-once hole punch. Since my earring lengths vary, I do not like using a jig which puts the holes in the same place on each card; sometimes I need holes way up close to the top of the card, sometimes lower. I eyeball my position of the holes depending on the length of each pair of earrings. Make yourself a little guide if you don't feel comfortable doing this by sight.

Cork earring card hole punch with push pins

Cork earring card punch closed

HOW TO MAKE THE CARD HOLE PUNCH

1. Slice a wine cork in half lengthwise. 

2. Glue (any craft glue works) or use double sided tape to adhere two push pins to the flat sliced side of one half of the sliced cork.

3. Place the card on a soft board (I use an inexpensive cork hotplate)

4. Eyeball where to center the holes between the card sides. My visual guide is to align the holes under specific letters in my name at the top of each card.

5. Keep the push pins parallel and find the best place for the holes that allow enough room for the earrings to hang from the earwire when they're in the holes without lying too low on your card.
6. Push the pins through the cards.

 

TIP: You may want to make more than one of these and vary the distance between the push pins to suit the scale of your earrings, with holes father apart if you make larger earrings.

I hope this tip helps you spend less time making gifts and more time giving them! (Or selling them!)

HAPPY HOLIDAYS–and check out the Little Cogs Earring Kit on www.sleeplessbeader.com for a fun earring project!

Studio storage and finished jewelry

Storing your stash is one thing; storing your finished creations is a whole new adventure. I used to pin my finished pieces all over  my booth display panels which were stuck in a corner of my room. Some things hung from hooks I made to cling to branches (yes, from trees). But it was a mess, the pins were bending all the time,  and I feared the ruin of my display panels.

I ended up hanging pegboard. I was not sure how it would look, or if it would be cost effective because I'd need LOTS of hooks, and worried about how pieces would hang.

As it turned out the boards look really clean and their natural wood color works great as the background color. Hooks come in lots of sizes and shapes, and I slipped sturdy tubes over several pegs to help round out the way pieces are hanging.

Thanks to my hubs Mike I only bought  hooks with smaller gauges of pegs (the part that goes into the holes) to fit easily. IMPORTANT TIP if you want to do pegboard! Larger pegs distort the holes and are a pain to move around. Make sure to look for the hooks with the slimmer pegs!

I also still use my branches and hammered copper hooks so my jewelry wall has a bit more of a display feeling than just plain pegboard. Why not paint it, you ask? Because paint scratches-- and what color would match all my jewelry? Plus you can see that the pegboard matches the woodwork trim in my studio!

Now I am on the look-out for a nicer tube-thingy than cardboard to pad some hooks. Maybe there's an interesting but neutral color,  easy-to-cut hose... or the tubes used to control network wires. I'll find something.

But meantime I am quite happy with clean arrangement,  ease of organization,  low cost and especially the now-I can-see-everything-and-so-can-customers look of my jewelry wall!
PS: Yes, it's a TV, and yes, that's my Swarovski CREATE YOUR STYLE Ambassador apron on my dress form! 

SLEEPLESS BEADER.COM New Shop!

EVOLUTION for Sleepless Beader! I've been working hard to grow the kit and tutorial sales part of what I do. This gives everyone out there a chance to make my designs and reveals which designs are ready to become workshops and classes with me at the helm, too. I have teamed up for this facet of my beady path with one of my sisters who is a whiz at the biz end of things. Her skills have enabled me to focus on what I do best, design and of course social networking! She's got the tech savvy to take over financials (taxes, tracking and ordering inventory, kitting and shipping, costing) and web based stuff such as our new site, and she even knows how to do some seed beading! With her help, the brand new sleeplessbeader.com commerce-enabled site will launch soon!

Along with the shopping cart part we'll have a newsletter sign up, calendar of events, special offers, a gallery, fun and games! Look for Sleepless Beader at the upcoming Bead Fest on August 17-19th at the Oaks Expo Center–Artisan Table 445. Kits and tutorials at the show will include popular favorites and new designs I have finally gotten around to writing and illustrating. Good thing I'm sleepless!

CraftOptics

The better to see you with, my dear!
Just got a pair of CraftOptics lenses. Wow these are cool!












They are naturally a bit more to wear than just normal glasses, but the soft silicone nose piece makes it really comfy. There's also a little light which works off a small battery pack that clips onto your pants or whatever, like a cell phone would. The light slides right onto the optic part for targeted illumination. Clever! The light cord runs through a clip on the arm of the specs, and has a small spring action clip to attach to your shirt so it stays out of the way. VERY nicely engineered. (My lenses look lit up in the photo but it's just a reflection from my laptop screen.) AND they come with croakers, the soft cords that slide onto the arm ends like the kind of eyeglass cords surfers wear, with a button that slides on the cords to adjust the specs to stay put or let them hang down.

The magnifier part flips up to reveal my personal prescription. The glasses are nice and large so it's easy to look up through the top part to see normally, and then look down through the optic part for magnification, as you need. It's all very well thought out the way these work.













Great for my eyes and especially my craftsmanship! I expect to be using these on Beads, Baubles, and Jewels segments taping soon, so you'll be able to see them in action–rather, see me in action using them–when the episodes go on the air. I'll let you know when they're on!

And yes, mine are purple.

Deep Blue Bling

Did you know that the average human eye can register quantities of 5 at a glance without counting, and after that, not so much? So if you instantly see 6 sets of 5 crystals, good for you!

So this box comes from Swarovski today, and it is RATTLING which of course makes us all salivate, right? I forgot that Xilions were being sent to me for an upcoming taping of Beads, Baubles, and Jewels for segments sponsored by EK Success. Check out the 6 blues I chose to play with in size 6mm. They are, clockwise from top: Indicolite, Montana, Pacific Opal, Jet AB, Mint Alabaster and center, Light Azore.

I must have been an interplanetary hitchiker to love these colors because they're super stellar, like extraterrestrial gleams of brilliance from otherworldly galactic entities. Don't let my inadequate photography fool you. (I actally had to tone down the luster or you'd be seeing sparkles before your eyes for days.)

Or in earthly realms, perhaps I wish to be a mermaid in the Caribbean swimming in such aquatic magnificence. I just love these colors, is what I'm saying.

You can space out in your own sparkling waves over these hues too. Look for them wherever EK Success is sold and in your local bead store.

What did I make from them? I'll show when they're created!

Fun with Beadalon

Making new videos for the Beadalon web site brought out
a variety of my facets, er, faces. :-)

Look for the videos now on Beadalon's You Tube page. My latest videos include how-to-do, why-to use, and what-to-use for: loom bead weaving, Elasticity stretchy cord designs, WildFire beading thread, all sorts of beading needles, bead organization and storage, arranging a beading work area, and Hybraid (Is it a wire? A beading thread? It's both!)

Here's one showing some basics for a well equipped beading work area.


Even though I was feeling a bit wired and threadbare myself after a long week just back from doing two back to back Jewelry Television shows, I know the videos now showing on Beadalon's You Tube page will educate and inspire you.

Stick around, because you never know when some of my actual design tutorials will appear, too!

Sorry, This Class is Cancelled

Or, why I cant teach one or two students
even if you buy me dinner.

Steampunk Herringbone Cuff by Leslie Rogalski (c) 2011
Only one student signed up. 
Cuff was recently selected to be featured
in the new Lark book Showcase 500 Beaded Jewelry
now on advance sale on Amazon.

People grab my arms when I wear pieces such as these and exclaim, ooh, teach this, teach this!

So I write up tutorials, a laborious and lengthy process. I spend days re-making designs I have so far only made intuitively– measuring the number of beads, calculating sizes, counting components, and simplifying technical aspects as I re-create my one of a kind pieces so I can teach them clearly and step by step.

I take photos I hope will entice, fill out forms meant to present the projects as fun and doable, and submit packages to events. I'm ecstatic when I get juried in. I make hotel and flight reservations. And then... I get one, maybe two students (thank you!) who sign up.

I can just feel all you other teachers sighing and nodding. It is never an impulsive decision to cancel a class even if we have but one student, because every single student is important and valued, very valued.

Cubic Right Angle Weave Fiesta Links bracelet
Leslie Rogalski (c)2011
Only two students signed up.
Have been told by those who learned this from me
that it's the best class ever to learn this stitch.

The truth is we cannot afford to travel to shows unless we make a profit. Not just cover travel expenses, not just be compensated for all the time it took to develop the class, write the tutorials, determine the best way to get a technique presented. Make money, as in, to put in the bank and save for the kid in college or get a real haircut not by your neighbor in beauty school.

It's not a profit just to pay your way and break even. That's living hand to mouth. I bet most of you are close to doing that no matter what your jobs are.

Purple Path Tila Herringbone cuff
by Leslie Rogalski (C)2011
Taught it to several "I'll never like seed beading" friends
who now can't stop beading.
SIGN UP FOR THIS CLASS
AT BEAD FEST SPRING

Sometimes it's hard not to be mad when a class you signed up for is cancelled. Teachers think you are the BEST PEOPLE EVER for wanting to be our students. We just wish there were more of you signing up. Then we can not only come to the shows and teach the classes, but eat, too.

There are a couple amazing shows with registration open NOW for fabulous classes, with renown, master teachers. They are very varied in time and cost and skill level, so there is bound to be at least one class you'd love. Maybe even one of mine.

Bead & Button is in June in Milwaukee, and Bead Fest Spring is almost here, April 13, 14 and 15th at the Oaks convention center, easy to reach, just a few miles from Valley Forge PA.

Hollywood Filmstrip loom cuff by Leslie Rogalski (c)2012
Sign up for it at Bead Fest Spring
Kit includes the loom and beads and the cool special bezel cuff!

Treat yourself for your birthday. Or your unbirthday. Celebrate your emancipation from that guy you thought was Brad but was really the pits. Classes are kosher for Passover, and I know the Easter bunny would leave a gift card for a class in your basket if you promise not eat all the jellybeans except the green ones.

BEAD FEST SPRING, Oaks, PA

BEAD & BUTTON SHOW, Milwaukee, WI